Related Accessory

The peripherals for electric locks are essential and can upgrade the performance of the access control system , e.g. door loop , surface mount housing , interlock module ....etc.


 

The Door Loops are wire extension protector when you install on doorframe to the door. It is gives attractive and neat result for the wiring; DL-350 and DL-200 metal hose Length is 40 cm.

 

DL-200


DL-200W

DL-350


DL-350-SP

DL-400

  • Flush mount door loop

 


PB-100 Position ball


LS-1802GF Door Latch


LS-2000 Mortise Latch Set

  • Adjustable latch throw (10~19mm)
  • Applicable to GK series electric strikes
  • For wooden doors
  • Stainless steel faceplate , zinc alloy main stand
  • For single -swing (left or right)
  • Catalogues (pdf)


 

ECY-72D Both Side Cylinder


ECY-72S Single Side Cylinder

SMB-040
(Plastic casing)

SMB-86ALU01 (Without Anodized)
SMB-86ALU02 (Anodized and Brushed)
SMB-86ALU03 (Chromium Plated)

  • Metal back box for British Standard SS Faceplate

SMB-050
(Stainless housing)

SMB-500
(Plastic casing)

SMB-750
(Metal casing)

SMB-861
For use with British box to surface mount installation.
(Metal housing)

Useful Gadgets accessory

FFP-1224

A functional fire panel which is connected between a Power Supply Unit and a Fire Alarm System.
The panel provides auto power off from the Back-up Battery Pack inside a Power Supply Unit and
hence functioning for instant unlock, upon AC failure signal given by the Fire Alarm System.
Connect all cable wires according to the installation sheet as provided
  • PSU Interface module for Fire alarm panel
  • Power Input:12~24VDC
  • Output:12~24VDC
  • Relay rated: 6A/125VAC~12A/125VAC;12A/28VDC
  • Dimensions: 47(L) x 59 (W) mm

ILM-200

  • Interlock Module (2-door)
  • Dimensions: 73 (L)x 63 (W)mm
  • Relay rated 3A/125VAC, 24VDC
  • 12~24VDC power input, input equivalent to Output voltage.
  • Operating Temper.: -20~+70o°C
  • Humidity: 0~95% non-condensing
  • User Guide (pdf)


TLM-100MST


TLM-200

Door Status Indicator with red/green LED light, showing monitoring status. (Such as: door, lock etc...)
TLM-100MST (Option SMB-040 for surface mount)
TLM-200 British sized (Option SMB-86ALU for surface mount)

  • Door Status Indicator
  • Operating voltage: 12~24VDC
  • Current draw : 40mA/12 VDC, 70mA/24 VDC
  • User Guide (pdf)

PSM-S1A12V

  • Waterproof Switching Module
  • Power input: 12~28VAC or 12~50VDC
  • Power output: 12VDC , 1A
  • Efficiency: >70%
  • Rip ply: <150mV (DC Input) <150mV (AC Input)
  • Line Regulations: 3%

SM1224-1A

  • Mini Voltage Switching Module
  • Power Input : 15~24VAC or 16~28VDC
  • Power Output : 12VDC, 300mA
  • Dimensions : 51(L)*40(W)*15(D)mm

 

SM1228
SM1228 Power Transformer Modules is an easy applicable control module for 13-28DC ranging input auto convert to 12DC voltage output great deal of real profitable.

  • Power Transformer Module
  • Power Input: 13~28VDC
  • Output: 12VDC, 300mA
  • Dimensions: 51(L)x40(W)x15(D)mm

DBR-200
The DBR-200 Relay module is worked when power input then contacts will change over from N/C (Normally Close) to N/O (Normally Open)

  • Relay Board
  • Power Input: 8~30VAC or 11~30VDC
  • Current draw: 45mA/12VDC
  • Relay Output: Relay rating: 5A/24VDC/240VAC

GPD-3015

  • Voltage Distribution Board
  • DC voltage averagely distributed to five output contacts
  • Each with ¡§PPTC¡¨ re-set table fuse protection based on the dynamic equilibrium of energy.
  • Each OUTPUT is protected by individual PPTC from over current
  • Therefore each load of output may not exceed 1AMP

GIANNI INDUSTRIES, INC
No. 13,Zhong Sing Road,Tu-Cheng Industrial Zone,Tu-Cheng City,Taipei,Taiwan 23678
E-mail: info@gianni.com.tw
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
Copyright © 2010 Gianni Industries, Inc. All Rights Reserved.