714-60 Mifare ® ID Reader With Selectable Outputs Data Sheet

• Power requirements: 5.0-13.6V dc. Current consumption is 100 mA typical.
• RF Frequency: 13.56 MHz.
• Card types supported: Mifare R Std, Mifare R Ultrallght , Mifare R DESFire.
• Contactless interface as per specification: ISO/IEC 14443 Type A.
• Output formats supported: Wiegand (44-bit, 34-bit, and 26-bit), Mag Stripe emulation, Clock/Data, RS232 (9600,n,8,1) EIA and TTL levels.

RD-100M

The RD-100M Mifare Proximity Reader is suitable for remote locations used in conjunction with an on-line system. It is designed to mount on a standard-single-gang (ANSI) electric wall box or on the surface of an interior or exterior wall. The electronics are potted with potting compound which protects the reader from harsh environmental conditions.

This unit is compatible with Mifare1 Cards with operating frequency of 13.56 MHz (HF) which is capable of reading any the Mifare card's serial number. It supports Wiegand 26 bits output Wiegand 26 bits that allows you to connect to any Wiegand output controllers.

GEMPROX-26M
GEMPROX-H
GEMPROX-E

Unobtrusive and stylish slim design can be mounted directly onto metal such as door mullions, GEMPROX Proximity Reader is suited for a remote locations when used in conjunction with an on-line system. Sealed with potting compound to withstand harsh environments providing reliable performance and high degree of vandal resistance.

GEMPROX Proximity Reader features for reading any compatible card's serial number. It supports Wiegand 26-bits or 26~37 bits output interfaces with all existing Wiegand protocol access control system Wiegand. The Green LED flashes and the beeper sounds when a proximity card is presented to the reader. The bi-color LED and beeper can also be controlled individually by the host system.

• Please refer to “ keytag” page for more information about Proximity cards & keytags.