PSM series
DIN-Rail Mounting Power Supply


PSM-01T

  • Automatically cut the power source when door open push button damages.
  • Adjustable relock time delay 0~60 seconds (VR)
  • Fail-secure lock 11Vdc 2A
  • fail-safe lock 13Vdc 1A

PSM-01T-4

  • Automatically cut the power source when door open push button damages.
  • Adjustable relock time delay 0~75 seconds (PIN)
  • Fail-secure lock 11Vdc 2A
  • fail-safe lock 13Vdc 1A

PSM-112S

  • Input :100~240AC 50-60Hz
  • Output:13.8VDC, 1A
  • Battery Charge

PSM-312S

  • Input :100~240AC 50-60Hz
  • Output:13.8VDC, 3A
  • Battery Charge

PSM-512S

  • Input :100~240AC 50-60Hz
  • Output:13.8VDC, 4.35A
  • Battery Charge

PSM-02

  • Input¡GAC230V ( or 110 on order requirement )
  • Output:DC12V 1.5A, AC12V 0.5A

PSU mini series

PSU12-12TB

  • Input Voltage:100~240 VAC
  • Output Voltage: 12 VDC, 1A (12 Watts)
  • Case Size(mm):50*48*40

PSU12-24TB

  • Input Voltage:100~240 VAC
  • Output Voltage: 24 VDC, 0.5A (12 Watts)
  • Case Size(mm):50*48*40

GPS series

GPS-3A

  • 2 AMP DC power supplies
  • Specify Out put: 8~16V DC
  • Specify Input:120Vac(or 230V AC)
  • Filtered & regulated DC output
  • Short Circuit protection
  • Build-in backup battery Charger for Uninterruptible
  • LED indicates power supply status

PSU-100

  • 2 AMP DC power supplies
  • Specify Out put: 12V DC
  • Specify Input:120Vac(or 230V AC)
  • Filtered & regulated DC output
  • Short Circuit protection
  • Build-in backup battery Charger for Uninterruptible

PSU-100-UL

  • UL Listed for US and Canada
  • 2 AMP DC power supplies
  • Specify Out put: 12V DC
  • Specify Input:120Vac
  • Filtered & regulated DC output
  • Short Circuit protection
  • Build-in backup battery Charger for Uninterruptible

PSU-200

  • 2 AMP DC power supplies
  • Adjustable relock time delay 1~30 seconds
  • Specify output: 8~16V DC
  • Specify Input:120Vac(or 230V AC)
  • Filtered & regulated DC output
  • Short Circuit protection
  • Build-in backup battery Charger for Uninterruptible

PSB series

Gianni PSB series power supplies are housed in a robust, compact wall mounted steel fabricated case with lift-off hinged front panel. In the event of a mains power failure, standby power is automatically provided from battery charging output.
 

Features:

  • Input: 110~120 VAc ¡]or 230~240VAC¡^.
  • Strong power output even enough for large load.
  • LED indicates power supply status.
  • Build-in triple section fuse protection
  • Each output is protected by individual PPTC
  • Build-in backup battery Charger for uninterruptible.
  • Tamper Switch Protection.

PSB1A-120-12

  • Input: 120VAC
  • Output: 12VDC, 1A
  • LEDs indicate: no LED
  • Output contact port: 1
  • Case size(mm):230*200*80

PSB1A-230-12

  • Input: 240VAC
  • Output: 12VDC, 1A
  • LEDs indicate: no LED
  • Output contact port: 1
  • Case size(mm):230*200*80

PSB1A-120-24

  • Input: 120VAC
  • Output: 24VDC, 1A
  • LEDs indicate: no LED
  • Output contact port: 1
  • Case size(mm):330*330*80

PSB1A-230-24

  • Input: 240VAC
  • Output: 24VDC, 1A
  • LEDs indicate: no LED
  • Output contact port: 1
  • Case size(mm):330*330*80

PSB2A-120-12

  • Input: 120VAC
  • Output: 12VDC, 2A
  • LEDs indicate: 1 LED Power status
  • Output contact port: 1
  • Case size(mm):230*200*80

PSB2A-230-12

  • Input: 240VAC
  • Output: 12VDC, 2A
  • LEDs indicate: 1 LED Power status
  • Output contact port: 1
  • Case size(mm):230*200*80

PSB2A-120-24

  • Input: 120VAC
  • Output: 24VDC, 2A
  • LEDs indicate: 1 LED Power status
  • Output contact port: 1
  • Case size(mm):330*330*80

PSB2A-230-24

  • Input: 240VAC
  • Output: 24VDC, 2A
  • LEDs indicate: 1 LED Power status
  • Output contact port: 1
  • Case size(mm):330*330*80

PSB3A-120-12

  • Input: 120VAC
  • Output: 12VDC, 3A
  • LEDs indicate: 2 LEDs
  • Output contact port: 3
  • Case size(mm):330*330*80

PSB3A-230-12

  • Input: 240VAC
  • Output: 12VDC, 3A
  • LEDs indicate: 2 LEDs
  • Output contact port: 3
  • Case size(mm):330*330*80

PSB3A-120-24

  • Input: 120VAC
  • Output: 24VDC, 3A
  • LEDs indicate: 2 LEDs
  • Output contact port: 3
  • Case size(mm):330*330*80

PSB3A-230-24

  • Input: 240VAC
  • Output: 24VDC, 3A
  • LEDs indicate: 2 LEDs
  • Output contact port: 3
  • Case size(mm):330*330*80

PSB3A-2A-115 (Input: 115 VAC )
PSB3A-2A-230 (Input: 230 VAC )

  • LEDs indicate: 2 LEDs
  • Output contact port: 3
  • Case size(mm):330*330*80

  • To switch 12 / 24 DC output witch screw fastened.
  • Current draw: 12VDC @ 3A, 24VDC @ 2A.

PSB5A-120-12

  • Input: 120VAC
  • Output: 12VDC, 5A
  • LEDs indicate: 2 LEDs
  • Output contact port: 5
  • Case size(mm):330*330*80

PSB5A-230-12

  • Input: 240VAC
  • Output: 12VDC, 5A
  • LEDs indicate: 2 LEDs
  • Output contact port: 5
  • Case size(mm):330*330*80

PSB5A-120-24

  • Input: 120VAC
  • Output: 24VDC, 5A
  • LEDs indicate: 2 LEDs
  • Output contact port: 5
  • Case size(mm):330*330*80

PSB5A-230-24

  • Input: 240VAC
  • Output: 24VDC, 5A
  • LEDs indicate: 2 LEDs
  • Output contact port: 5
  • Case size(mm):330*330*80

Optional Accessories

PSB-TAMPER

  • Tamper Switch
  • When housing case is opened, the tamper switch will switch to N. O.¡]Normal Open¡^

NP7-12

Copyright © 2008 Gianni Industries, Inc. All Rights Reserved.