Call Point

Call Point
The CP series call point, with switch pole change over contacts from N/C to N/O. The main function is to override the electrical locking/release devices in case of emergency. With Key to replace glass or reset unit

The call points are available in the 4 colors shown. These are not exact matches and are for guidance only. Indoor models are supplied in the color in there entirety.

	Red	Call points for use in Fire protection systems are always Red , and meet a defined color requirement according to Fire Standards. There are no other formal standards which dictate the use of particular coolers for different applications, although individual territories have adopted the generic colors for different needs.
	Green	Green is normally associated with Access Control Systems and Door Release Applications. White too is used in these systems.
	Yellow	Yellow is associated with Gas Release or Extinguishing Systems and occasionally Venting Systems.
	White	White is used in Electrical Systems to match standard white fittings.

CP-15 series (Break Glass Unit)
	CP-15-GE The CP-15 series call point, with the contact from N/C to N/O. the main function is to override the electrical locking/release devices in case of emergency. With Key to replace glass or reset unit.	Break Glass Unit Dimensions:88x88x52mm Contact Resistance: 150mΩ Switch rated: 3A@125VAC~ Catalogues (pdf) User Guide (pdf)

CP-21 series (Break Glass Unit)

The CP-21 series call point, with double pole change over contacts from N/C to N/O. The main function is to override the electrical locking/release devices in case of emergency. With Key to replace glass or reset unit.

CP-21-RE


CP-21-GE	CP-21-WI	CP-21-YL

Break Glass Unit
Double pole change
Dimensions:88x88x52mm
Contact Resistance: 150mΩ
Switch rated: 3A@125VAC~
Catalogues (pdf)

CP-21-UC

With poly carbonate hinged cover
It used to avoid the user mistakenly press the button and keep the device clean

CP-21-GL

Glass

CP-22 series (Reset table Switch)

The CP-22 series call point (Reset table Switch), with double pole change over contacts from N/C to N/O. The main function is to override the electrical locking/release devices in case of emergency. With Key to reset unit.

Reset Key

Reset table Switch
Double pole change
Dimensions:88x88x60mm
Contact Resistance: 150mΩ
Switch rated: 3A@125VAC~
Catalogues (pdf)

CP-22-GE

CP-22-RE

CP-22-WI

CP-22-YL

CP-21 series (NEW)

The CP-21 series Break Glass call point, with double pole change over contacts from N/C to N/O. The main function is to override the electrical locking/release devices in case of emergency. With Key to replace glass or reset unit. With back light for L types. Catalogues (pdf) User Guide (pdf) Patent: M328067 (Taiwan)		Break Glass Unit Double pole change Dimensions:87x87x55mm Contact Resistance: 50mΩ Current Draw (Back light):25mA@12Vdc; 45mA@24Vdc Switch rated: 1A@125V~

CP-21G

CP-21R

CP-21W

CP-21Y

CP-21G-L

CP-21R-L

CP-21W-L

CP-21Y-L

CP-24 series

The CP-24 series Break Glass call point, with quadruple pole change over contacts from N/C to N/O. The main function is to override the electrical locking/release devices in case of emergency. With Key to replace glass or reset unit. With back light for L types． Catalogues (pdf) User Guide (pdf) Patent: M328067 (Taiwan)		Break Glass Unit Quadruple pole change Dimensions:87x87x55mm Contact Resistance: 50mΩ Current Draw (Back light):25mA@12Vdc; 45mA@24Vdc Switch rated: 1A@125V~

CP-24G

CP-24R

CP-24W

CP-24Y

CP-24G-L

CP-24R-L

CP-24W-L

CP-24Y-L