¡@¡@¡@The series of PH400/800 electromagnetic locks, the upgraded versions of PH-300/600, not only maintain their great features and proven performance, but also provide the latest features. The latest design greatly improves the inconvenience and limitation of ordinary electromagnetic locks.

What is ¡§handled¡¨ electromagnet lock?

Advantages:

1.Aluminum anodized handle fit in with any door frame, so there is no confliction to affect the elegant appearance.

2. Magnet-locks with handle combination is suitable for vertical installation to the middle of door jamb to maintain even holding force to the door, not only improved the defect of uneven holding force due to traditional installation at the door corner but also increased its security, stability and lifetime.

3. Magnet-locks with handle combination are pre-assembled as a set to provide easy installation to every door site with no other accessories required.

4. The handle and trimming plate are widened for easy installation.

5. The arc-shaped design jamb decreases the abrasion caused by the door.

6. The upper and bottom cases are fixed by anti-tamper screw to prevent deformation and enhance its reliability.

7.PH-400 provides up to 600lbs holding force for use on ordinary doors. As for extra-high doors, PH-800 build in double magnet-lock of 2 x 600 lbs, Length 2.5M is preferable.


PH-400/800 ¡§Handled¡¨ Electromagnet Lock Specifications:

¡· Voltage Tolerance: ¡Ó15%
¡· Current Draw:
PH-400: 500mA@12Vdc; 250mA@24Vdc
PH-800: 500mA@12Vdc X 2; 250mA@24Vdc X 2
( at 20 ¢J ambient temperature condition )
Magnetic bond sensor monitor output (SPDT rated 3A@12V DC), remotely monitors the door lock or unlock status. (N.C. Output--Door opened; N.O. Output--Door closed)
¡· Operating Temperature: -10~ 55 ¢J (14~ 131¢K)
¡· Humidity: 0~95% non-condensing.
¡· Lock's surface temperature (when the power is on) : Can not exceed ambient temperature by 20¢XC.
¡· Holding Force:
PH-400: 600 lbs ( 272 Kg )
PH-800: 600 lbs * 2 (272Kg *2)
¡· Special Finishes for magnet and armature plate: Zinc
¡· Epoxy Potting Compound: E87252 (S), UL94V-0

¡· The height of door leaf and door frame should be the same.
¡· For safety factor , the PH-400/800 Electromagnet Series are suitable for "In-swinging doors", moreover the door leaf must be consistent with the doorframe.