¡@¡@¡@ST-630E access control system is equipped with a built-in RS-485 interface converter with maximum control range up to 500 meters. It is ANSI standard sized for mortise installation or optional back casing for surface mount. The inner structure is epoxy sealed which protects the components from harsh environmental conditions. ST-630E supports Wiegand 26-34 bits output which can be connected up to 254 controllers. Supplied with software to strengthen the security level with optional 485 USB converter or 485 TCPIP wireless IP converter.


Advantages:

1. RS-485 interface converter: Fast data transmission

2. Access control in different door group, time zone and holidays

3. Anti-pass back setting

4. Vandal resistance, time delay and forced entry alarm output

5. Far distance access status monitoring by software.

6. Access Modes for only proximity, codes + proximity, codes or proximity

7. Record up to 1000 users.

8. The ANSI standard sized for flush mount to make the installation aesthetically

9. User¡¦s photo can be uploaded to the software and printed on the proximity card

Flush mounting type

Photo storage: Users¡¦ photo can be showed while data transmitting

Specifications:

• Connection : Connection/ Stand-alone
• Users :1000
• Record Volumes :1000
• Reader Application :WG26,WG34
• Keypad : 12 Keys(0-9,*,#)
• Interface :RS485
• Proximity Distance : About 125 and 15 cm /13.56 for around 7 cm
• Proximity Frequency :125Khz (EM)
• Indicators : 3 LEDs
• Dimension (mm): 114(L) x 69.5(W) x 10(D)
• Operating Voltage :12 VDC
• Temperature :-5 C-60 C
• Humidity : 5%-95%(Non-condensing)
• Catalogues (pdf)
• User Guide(pdf)