Magnet-locks innovated by Gianni Industries Inc. |
The new birth of Magnet-lock with handle combination breaks through conventional concept with no limitation for doors site application . Magnet-locks are designed to secure the door or gate that closes against a fixed stop. The product consists of an electromagnet which mounts on the fixed frame and a strike plate which mounts on the moving door or gate. The strike plate is delivered with fasteners that permit it to flex so that when the door closes, it automatically self aligns with the magnet. Magnetic force then takes over, strongly securing the door. Release is achieved by switching off power to the magnet. PH-300 / PH-600 are suitable for left or right hand opening doors , with an operating temperature range of [ -10 C to 55 C ].
For elimination of surface mount installation which may recess the contribution of outlook appearance or door deformation, Gianni Industries always stepping on developments to concentrate on PH-300 & PH-600 series with unique designation, which indeed gives full solution to conventional Magnet-locks, can not be doing.
Briefly speaking, Magnet-locks comes with handle which strike plate concealed means no extra passive device needed to affix, when door closes. PH-300 / PH-600 made from the basic permanently quality standard for Gianni Magnet-locks, revolutionary concept blended in addition 。
| 1. Aluminum anodized handle fit in with any door frame, so that no confliction nor affective to generate the superb classified looking at site. |
2. Magnet-locks with handle combination suitable for vertical installation to door jamb, improving the defeats of non-average taking over door secure forces when an option for door header mounting. |
3. Easy-doing to every door site installation, which provides by no other accessories is essential for meeting job constructive as convenience as you may imagine. |
4. PH-300 contains up to 600 lbs securing hold forces for very common demanding on doors, as for over heighten requirement, PH-600 build in double Magnet-locks for 2.5 meters against 600 lbs x 2 adaptable. |
PH-300/600 「 Handled 」 Electromagnet Lock Specifications:
◎ Voltage Tolerance: ±15%
◎ Current Draw:
PH-300: 500mA@12Vdc; 250mA@24Vdc
PH-600: 500mA@12Vdc X 2; 250mA@24Vdc X 2
( at 20 ℃ ambient temperature condition )
Door open condition N.C. Output; door close condition N.O. Output
◎ Operating Temperature: -10~ 55 ℃ (14~ 131 ℉ )
◎ Humidity: 0~95% non-condensing.
◎ Lock's surface temperature (when the power is on) : can not exceed ambient temperature by 20°C .
◎ Holding Force:
PH-300: Up to 600 lbs ( 272 Kg )
PH-600: Up to 1,200 lbs ( 545 Kg )
◎ Special Finishes for magnet and armature plate: Zinc
◎ Epoxy Potting Compound: E87252 (S), UL94V-0
◎For safety factor , the PH-300/600 Electromagnet Series are suitable for "In-swinging doors", moreover the door leaf must be consistent with the doorframe.
For more PH-300/600 Electromagnet Lock Series detailed information, please click here, or you can contact our sales department directly. |
