962 EZ-Plus 2-Door Access Control System

The system consists of a controller with relays to operate a single door or two independent doors. The controller supports two various Secure Tag Reader or two Wiegand devices which can be mounted up to 50 meters from the controller. The Readers are fully potted and suitable for mounting outdoors. Tampering with these readers will not compromise the systems security. Programming the system is very simple and requires a Master Tag to put the unit into programming mode and then to follow a simple procedure to add or delete cards. A jumper setting allows tags to be added automatically to both readers or to allow each reader to have its own set of tags.

Simple and quick programming using a Master tag.
The first Tag presented to the system will be stored in the memory as Master Tag.
Programming functions:
Add Tags
Delete Tags
Clear Memory (Secure Tag Reader)
Adjust/Set Relay operating time
Lost Tags can be deleted using an optional Tag Simulator in conjunction with the master tag.
Controller supports two readers.
Controller can control 2 independent doors or a single door (jumper setting).
Controller holds up to 2000 tags in non-volatile memory.
Each reader can have its own set of tags or can be set to add tags automatically to both readers.
The last 2000 transactions stored with date & time stamp in non-volatile memory (only valid transactions).
Simple logging software to download transaction data and set date & time.
Optional Door Switch will reset door strike relay when the door opens.
Exit Push Button.
Simple installation (3 or 4 wires from reader to controller).

Catalogues (pdf)
User Guide (2.5 MB.zip)

962

Controller

714-60
Mifare ® ID Reader With Selectable Outputs Data Sheet

Catalogues (pdf)

Easy Programming


Present the Master tag once to the reader, wait for the short GREEN-LED flashing, the unit is now in TAG ADD mode.	Present the Master tag twice to the reader, wait for the short GREEN-LED double flashing, the unit is now in TAG DELETE mode.	Read the Master Tag three times to the reader, wait for Long GREEN-LED flashing, each flash is 1 second of relay operation time.